FIA FW deflection test – point of load

3.17.1 Bodywork may deflect no more than 10mm vertically when a 500N load is applied vertically to it 800mm forward of the front wheel centre line and 795mm from the car centre line. The load will be applied in a downward direction using a 50mm diameter ram and an adapter 300mm long and 150mm wide. Teams must supply the latter when such a test is deemed necessary.

2 thoughts on “FIA FW deflection test – point of load

    • Nem. A McLaren szárny csak gyakorlati példa/illusztráció, hogy az FIA hova [piros pontok] teteti a csapat által biztosított adaptert, amire az 500 és 1000 Newton terhelést hozzák létre.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s